Welcome at our booth at lighting days Lyon We are here at the “Espace innovation” I would like to show you our wireless automated self testing solution for emergency lighting. Come closer. I will show you what we have in our booth. We are here together with our partner Intellinnov and our UK partner Liteplan. We have created a demonstration for wireless automated self testing of emergency lighting. As you can see here on the dashboard, we have two emergency lights As you can see, the battery power is low All the power is switched off during the night So the batteries are still charging As you can see in the graphs, they switch off the power around midnight. and they switch it on again at 08:00h So with this solution we can start a function test on both emergency lightings In about 30 seconds, the emergency lighting drivers report back the results. As you can see, both emergency lights are functioning normally. Besides this screen for emergency lighting, we can also show you how busy it was in our booth yesterday. Our multisensor measures the triggers during the day Here you can see that we have an average of 500 triggers every 15 minutes in our booth. is the dashboard on energy consumption. The last thing I want to show you, is the dashboard on energy consumtion As you can see, we have a staggering energy consumtion of 0,17 KWPH over the last 24 hours. Of course that is normal as we only have a few panels here. Besides that we offer remote control. This is the master control with which we can remotely switch off all the lighting in our booth. Usually this is organised via our cloud sever and our management dashboard We hope that you will find the time to visit us at Lighting Days Lyon. See you next time!